Safety & Security Gates  (77)

3-position control switch for automated vehicular gates, interior use only Center position is neutral for normal operation Down position is momentary contact to open a gate Up position is toggled to hold a gate open Can be used with most gate operators

Maximum gate width 18-feet. Maximum gate weight 700 pounds. Swings gate 90 degrees in approximately 15-seconds. 1/2 HP continuous-duty motor. 115, 230*, 460* VAC.  Class I, II, III and IV applications.

This Slide Gate Operator delivers the convenience of self-setting limits with the safe operation you expect from a DKS Operator. This operator can be used in residential, commercial or industrial high-use applications, with an innovative fail-safe design which significantly reduces the chance of injury or entrapment and makes this the safest slide gate operator in the market today. Designed to work in many configurations, this operator can be used for front, center or rear drive applications and can be pad or post mounted.  The 9150 is offered with a metal or polypropylene (Poly) cover.  Operators with the Poly cover inlude the MicroPlus RF Kit (1 TX + 1 REC).

DKS 9500 series of Vehicular Slide Gate Operators are designed for use on very large and very heavy gates in maximum security applications only. These operators must never be used in applications serving the general public. These heavy duty operators use a high tensile steel alloy roller chain as the pulling medium, which is immune to slippage and the challenges of uneven terrain – and also simplifies installation. User can set the speed of the gate up to 4 ft/sec. (1.2 m/sec.), with an electronic braking option.  Features:  Speed control module. Slow start / slow stop. Direct driven limit nuts. Anti-tailgating feature. Adjustable partial open.. Gate tracker reporting output. Built-in diagnostics. Ports for plug-in loop detectors. Selectable stop / reverse loop functions. Two 115 VAC convenience outlets. Fail-secure operation includes crank for manual operation. Programming switches. Built-in 3-button control (open-close-stop) Built-in power On/Off switch.

DKS 9500 series of Vehicular Slide Gate Operators are designed for use on very large and very heavy gates in maximum security applications only. These operators must never be used in applications serving the general public. These heavy duty operators use a high tensile steel alloy roller chain as the pulling medium, which is immune to slippage and the challenges of uneven terrain – and also simplifies installation. User can set the speed of the gate up to 4 ft/sec. (1.2 m/sec.), with an electronic braking option.  Features:  Speed control module. Slow start / slow stop. Direct driven limit nuts. Anti-tailgating feature. Adjustable partial open.. Gate tracker reporting output. Built-in diagnostics. Ports for plug-in loop detectors. Selectable stop / reverse loop functions. Two 115 VAC convenience outlets. Fail-secure operation includes crank for manual operation. Programming switches. Built-in 3-button control (open-close-stop) Built-in power On/Off switch.

Maximum gate width 22-feet. Maximum gate weight 800 pounds. Swings gate 90 degrees in approximately 15-seconds. 1 HP continuous-duty motor. 115, 230*, 460* VAC. Class I, II, III and IV applications.

Provides manual control of automated vehicular gates, interior use only OPEN - CLOSE - STOP control Operates with DKS models 6050, 6100 and 6300 only

DKS 9500 series of Vehicular Slide Gate Operators are designed for use on very large and very heavy gates in maximum security applications only. These operators must never be used in applications serving the general public. These heavy duty operators use a high tensile steel alloy roller chain as the pulling medium, which is immune to slippage and the challenges of uneven terrain – and also simplifies installation. User can set the speed of the gate up to 4 ft/sec. (1.2 m/sec.), with an electronic braking option.  Features:  Speed control module. Slow start / slow stop. Direct driven limit nuts. Anti-tailgating feature. Adjustable partial open.. Gate tracker reporting output. Built-in diagnostics. Ports for plug-in loop detectors. Selectable stop / reverse loop functions. Two 115 VAC convenience outlets. Fail-secure operation includes crank for manual operation. Programming switches. Built-in 3-button control (open-close-stop) Built-in power On/Off switch.

DKS 9500 series of Vehicular Slide Gate Operators are designed for use on very large and very heavy gates in maximum security applications only. These operators must never be used in applications serving the general public. These heavy duty operators use a high tensile steel alloy roller chain as the pulling medium, which is immune to slippage and the challenges of uneven terrain – and also simplifies installation. User can set the speed of the gate up to 4 ft/sec. (1.2 m/sec.), with an electronic braking option.  Features:  Speed control module. Slow start / slow stop. Direct driven limit nuts. Anti-tailgating feature. Adjustable partial open.. Gate tracker reporting output. Built-in diagnostics. Ports for plug-in loop detectors. Selectable stop / reverse loop functions. Two 115 VAC convenience outlets. Fail-secure operation includes crank for manual operation. Programming switches. Built-in 3-button control (open-close-stop) Built-in power On/Off switch.

DKS 9500 series of Vehicular Slide Gate Operators are designed for use on very large and very heavy gates in maximum security applications only. These operators must never be used in applications serving the general public. These heavy duty operators use a high tensile steel alloy roller chain as the pulling medium, which is immune to slippage and the challenges of uneven terrain – and also simplifies installation. User can set the speed of the gate up to 4 ft/sec. (1.2 m/sec.), with an electronic braking option.  Features:  Speed control module. Slow start / slow stop. Direct driven limit nuts. Anti-tailgating feature. Adjustable partial open.. Gate tracker reporting output. Built-in diagnostics. Ports for plug-in loop detectors. Selectable stop / reverse loop functions. Two 115 VAC convenience outlets. Fail-secure operation includes crank for manual operation. Programming switches. Built-in 3-button control (open-close-stop) Built-in power On/Off switch.

DKS 6006 Swing Gate Actuator offers convenience and reliability in a compact, aesthetic design.  This actuator mounts directly to your gate and pilaster, which simplifies installation and does not require concrete mounting pads.  The screw-driven action is powered by a 24 Volt DC motor, eliminating the worry over hydraulic leaks, check valves or pumps.  Built-in no-contact magnetic limit switches precisely control the start / stop speed of the actuator, all powered by a microprocessor control board.

Maximum gate width 14-feet. Maximum gate weight 500 pounds. Swings gate 90 degrees in approximately 10-seconds. 1/2 HP continuous-duty motor. 115 VAC, 5.4 Amps. Class I and Class II applications. Compliant with UL 325 and 991. ETL listed. Dimensions (operator only): 13.5"W x 11"H x 23"D

Maximum gate width 10-feet. Maximum gate weight 400 pounds. Swings gate 90 degrees in approximately 10-seconds. 1/2 HP limited-duty motor. 115 VAC, 4.3 Amps. Class I applications. Compliant with UL 325 and 991. ETL Listed. Dimensions (operator only): 13.5"W x 11"H x 23"D

Ideal for exterior applications, interior too Can be surface or post mounted OPEN - CLOSE - STOP control Operates with DKS models 6050, 6100 and 6300 only

DKS 9100 Slide Gate Operators provide durability and high-cycle usage. The innovative fail-safe design of these operators significantly reduces the chance of injury or entrapment and makes these operators the safest Slide Gate Operator in the market today. Designed with versatility in mind, the 9100 Operators can be configured for front, center or rear drive applications and can be pad or post mounted. They are offered with a metal or polypropylene (Poly) cover.  Operators with the Poly Cover include a MicroPlus RF Kit (1 TX + 1 REC).

DKS 9050 Slide Gate Operator provides durability through high-cycle usage, all in a solid design. The innovative fail-safe design of these operators significantly reduces the chance of injury or entrapment and makes these operators the safest residential Slide Gate Operator in the market today. Designed with versatility in mind, the 9050 Operators can be configured for front, center or rear drive applications and can be pad or post mounted. They are available with a metal or polypropylene (Poly) cover.  Operators with the Poly Cover include a MicroPlus RF Kit (1 TX + 1 REC).

The DKS Model 9000 Slide Gate Operator offers powerful and safe access control in a small, compact design. The steel frame and belt drive/gear-box reduction system provide a powerful, yet extremely quiet, slide gate operation. The 9000 uses an advanced microprocessor control circuit with outstanding features. Designed with versatility in mind, these Operators will fit most slide gate operation requirements. These Operators are ideally used in residential, commercial or industrial high-use applications.

DKS 9500 series of Vehicular Slide Gate Operators are designed for use on very large and very heavy gates in maximum security applications only. These operators must never be used in applications serving the general public. These heavy duty operators use a high tensile steel alloy roller chain as the pulling medium, which is immune to slippage and the challenges of uneven terrain – and also simplifies installation. User can set the speed of the gate up to 4 ft/sec. (1.2 m/sec.), with an electronic braking option.  Features:  Speed control module. Slow start / slow stop. Direct driven limit nuts. Anti-tailgating feature. Adjustable partial open.. Gate tracker reporting output. Built-in diagnostics. Ports for plug-in loop detectors. Selectable stop / reverse loop functions. Two 115 VAC convenience outlets. Fail-secure operation includes crank for manual operation. Programming switches. Built-in 3-button control (open-close-stop) Built-in power On/Off switch.

The DKS Model 9000 Slide Gate Operator offers powerful and safe access control in a small, compact design. The steel frame and belt drive/gear-box reduction system provide a powerful, yet extremely quiet, slide gate operation. The 9000 uses an advanced microprocessor control circuit with outstanding features. Designed with versatility in mind, these Operators will fit most slide gate operation requirements. These Operators are ideally used in residential, commercial or industrial high-use applications.

The DKS DC Swing Gate Operator is perfect where backup power is critical, as it will keep running even when AC power has been lost. The solar power version is ideal in applications where AC power is unavailable, allowing you to add your own solar system for power, or you can choose the DKS solar kit.This Swing Gate Operator offers versatile and safe operation in a small, compact design, and is ideally suited for residential or commercial applications.

Fully enclosed drive mechanism Adjustable built in limit switches precisely control the start / stop speed, and travel of gate for smooth operation 24 VDC operating power Batteries included Built-in battery charger Ports for Exit and Reverse plug-in loop detectors 90° in approximately 18 seconds Gate overlap feature for dual gate operation Magnetic lock power circuit Built-in reset and test buttons Maximum run timer Built-in high current warning

Adjustable, no maintenance magnetic limits. Overlap feature for bi-parting swing gate operation. Simple connection for secondary operator in bi-parting applications. Selectable shadow/reverse loop function. Magnetic lock power provided. Ports for plug-in loop detectors. Three 115 VAC convenience outlets. Gate tracker reporting output. Programming switches. Built-in reset switch. Built-in power On/Off switch. Secondary unit includes 50 Ft cable.

The 6500 series operators are designed to operate vehicular swing gates in residential, commercial and industrial applications for both single and bi-parting gates. The unique design of this operator allows for easy access to the electronics and mechanical areas of the operator without ever having to remove the gate arm. This simplifies installation and maintenance. The electronic magnetic limits will never wear out or break and they are easily adjusted. The solid steel frame and belt driven gear box make this operator one of the quietest on the market today.

DKS 6400 installs in-ground, making it virtually invisible – and quiet – satisfying the most sophisticated automation needs without being detrimental to the original gate design. Invisible and powerful, the motor/drive mechanism is constructed in die-cast aluminum with a special corrosion-proof treatment, and because the drive unit is gear-driven, there is no need to worry about hydraulic leaks, check valves, or pumps. The in-ground, self-supporting foundation box is built from corrosion-proof steel and has a galvanized steel cover. A lockable manual release lever is designed so it can be operated from inside or outside the gate.

The DKS 1175 Overhead Gate Operator is designed for high traffic underground parking applications serving gated communities, apartment complexes, commercial buildings and industrial sites. An optional cover is available. This Operator is not designed for residential applications and should never be used to operate overhead sectional garage doors.

The 9024 can run exclusivly on AC power with battery backup, or solely on solar power.The DKS DC Slide Gate Operator is a great option where backup power is critical, as it’s designed to keep running when AC power has been lost. The solar power version is ideal in applications where AC power is unavailable, with the option to add your own solar system for power, or you can use the DKS solar kit.The DKS 9024 DC Slide Gate Operator offers powerful, yet safe, multifunctional operation all in a small, compact design – ideally suited for residential or commercial applications.

Maximum gate length 75-feet. Maximum gate weight 2000 Lb., #60 chain*. (*Assumes gate is on level ground, in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.) Adjustable solid state speed control, 1/2 to 2 Ft./sec. Slow start / slow stop function. 30:1 gear reduction running in a continuous oil bath. 2 HP continuous-duty motor. Operator is shipped with chain brackets and 20-feet of #60 chain. Class III and IV applications only. ETL Listed.  Dimensions: 20 "W x 35.5"H x 18"D

Maximum gate length 75-feet. Maximum gate weight 8000 Lb., #80 chain*. (*Assumes gate is on level ground, in good condition with properly adjusted hardware.  Other external factors may affect the performance of the gate operator.) Adjustable solid state speed control, 1/2 to 2 Ft./sec. Slow start / slow stop function. 30:1 gear reduction running in a continuous oil bath. 3 HP continuous-duty motor. Operator is shipped with chain brackets and 20-feet of #80 chain. Class III and IV applications only. ETL Listed.  Dimensions w/pedestal: 31.5 "W x 47"H x 16.5"D

Maximum gate length 75-feet. Maximum gate weight 5000 Lb., #60 chain*. (*Assumes gate is on level ground, in good condition with properly adjusted hardware.  Other external factors may affect the performance of the gate operator.) Adjustable solid state speed control, 1/2 to 2 Ft./sec. Slow start / slow stop function. 30:1 gear reduction running in a continuous oil bath. 3 HP continuous-duty motor. Operator is shipped with chain brackets and 20-feet of #60 chain. Class III and IV applications only. ETL Listed. Dimensions w/pedestal: 31.5 "W x 47 "H x 16.5"D

Maximum gate length 100-feet. Maximum gate weight 2000 Lb. (#50 chain) / 3000 Lb. (#60 chain). Assumes gate is on level ground, in good condition with properly adjusted hardware.  Other external factors may affect the performance of the gate operator. Set speed 1 Ft./sec. 40:1 gear reduction running in a continuous oil bath. 1 HP continuous-duty motor. Operator is shipped with chain brackets and 20-feet of #60 chain. Class III and IV applications only. ETL Listed.  Dimensions: 20 "W x 35.5"H x 18"D

Maximum gate length 100-feet. Maximum gate weight 3000 Lb., #60 chain*. (*Assumes gate is on level ground, in good condition with properly adjusted hardware.  Other external factors may affect the performance of the gate operator.) Adjustable solid state speed control, 1/2 to 4 Ft./sec. Emergency Close 6 Ft./sec. Slow start / slow stop function. 10:1 gear reduction running in a continuous oil bath. Disc brake. 3 HP continuous-duty motor. Operator is shipped with chain brackets and 20-feet of #60 chain. Class III and IV applications only. ETL Listed.   Dimensions w/pedestal: 31.5 "W x 47"H x 16.5"D

BG-P870 is a double fixed folding security gates that help control and regulate access to halways and receiving dock doors while allowing for unimpeded air flow and visibility. These folding gates are manufactured from corrosion-resistant galvanized steel and can pivot and swing 180 degrees for unobstructed access when open.

A robust and heavy-duty design, the Newgate Type 1 sliding gate delivers high performance levels time after time. It is available in two styles, cantilever for spans of up to 9.5 metres (single leaf) or 19 metres (double leaf) and tracked up to 17.5 metres (single leaf) or 35 metres (double leaf).

Bi-fold gates, also referred to as Speed gates, quick fold gates and fast gates are available to suit aperture widths of up to 7.0m. They operate at a speed of 1m per second, and are fully compatible with any access control system.

The Fortress Structural Slide Gate, manufactured by Tymetal Corp., is a cantilever system of unique double track design appropriate for openings up to 40 feet for singles and up to 80 feet for doubles. The frame is fabricated from aluminum alloy extrusions with a top primary member rectangular in cross section and the bottom member a structural channel. Vertical members at the ends of the frame and between the counterbalance and opening are square in cross section with nominal base dimensions of no less than 2” x 2”.

Cova Security Gates 10601 is the first generation bi folding automated speed gate product but nonetheless remains the perfect solution where height and span of opening are critical factors.  The bi fold gate is ideally suited for special appearances and bespoke design and is frequently used by architects when specifying timber, glass and sheet steel requirements. Standard finish - powder coated in a RAL colour to suit. Can provide effective width of 10 metres and 5 metres height.

The LoTracker is the renowned Cantilevered Sliding Gate from Frontier Pitts which secures widths up to 15m. The Ultimate Cantilevered Security Sliding Gate which requires no ground track or support across the roadway. The gateleaf is supported by a main bottom beam, which slides 100mm above the road surface. The balance is provided by a unique enclosed runback track, which enables the gate to be fully projected across the roadway without tipping. The LoTracker Sliding Gate is 100% duty rated and designed for continuous & frequent use.